Removing Cables From The Front Panel Module - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

13.1.3.3 Removing cables from the front panel module

Figure 469: Removing the front panel cable
Ê Remove the front panel cable from the defective front panel module as
shown.
Ê If the front LAN connector has been installed in the defective front panel
module, remove the cable as described in section
connector" on page
Ê If the front VGA connector has been installed in the defective front panel
module, remove the cable as described in section
connector" on page
TX300 S7 / RX350 S7
730.
746.
Upgrade and Maintenance Manual
Front panel and external connectors
"Removing the front LAN
"Removing the front VGA
707