Installing The System Board; Mounting The System Board - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

14.5.4 Installing the system board

14.5.4.1 Mounting the system board

Figure 531: Installing the system board (A)
Ê Hold the new system board by the memory module ejectors and a PCI slot.
V
CAUTION!
– Do not lift or handle the system board by any of its heat sinks!
– Ensure not to damage the EMI springs to comply with applicable
EMC regulations and satisfy cooling requirements and fire
protection measures.
Ê At a slight angle, lower the system board into the chassis.
TX300 S7 / RX350 S7
Upgrade and Maintenance Manual
System board and components
803