Concluding Steps - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Fans
Figure 241: Mounting the system fan holder (B)
Ê Carefully lower the fan holder into the chassis (1) until the two locking tabs
(2, see close-ups) engage.
Ê Ensure that the connectors on the fan modules properly engage with the fan
connectors on the system board.
8.2.2.5

Concluding steps

Perform the following procedures to complete the task:
Ê Reinstall the air duct as described in section
on page 94.
Ê Close the side / top cover as described in section
on page 107 (rack server) or
server).
380
"Mounting the side cover" on page 114
Upgrade and Maintenance Manual
"Installing the system air duct"
"Mounting the top cover"
TX300 S7 / RX350 S7
(tower