Cabling The 4X 3.5-Inch Hdd Extension Box; Installing Hdd Modules Into The 4X 3.5-Inch Hdd Extension Box; Concluding Steps - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

7.4.5.6

Cabling the 4x 3.5-inch HDD extension box

Ê Connect SAS and power cables to the 2x 3.5-inch HDD SAS backplane as
described in section
page 259.
Ê If applicable, connect slimline ODD and LSD module cables as described in
section "Cabling the slimline ODD on the HDD extension box" on page
7.4.5.7

Installing HDD modules into the 4x 3.5-inch HDD extension box

Ê Close the front cover and reinstall the ID card as described in section
"Closing the server" on page
Ê Install HDD modules or HDD dummy modules into the additional HDD slots
as described in sections
and "Installing a 3.5-inch HDD dummy module" on page
I
For detailed information on HDD mounting order, refer to section
inch HDD configurations" on page
7.4.5.8

Concluding steps

Perform the following procedures to complete the task:
Ê Reinstall the system fan holder as described in section
fan holder" on page
Ê Reinstall the air duct as described in section
on page 94.
Ê Close the side / top cover as described in section
on page 107 (rack server) or
server).
Ê When working on a rack-mounted server, secure it in the rack as described
in section "Sliding the server into the rack" on page
If the server has been completely removed from the rack for maintenance
purposes, reinstall and secure it in the rack as described in section
"Mounting the server in the rack" on page
Ê Reconnect the AC power cords to the power supply units and secure them
with PSU cable brackets as described in section
the mains" on page
TX300 S7 / RX350 S7
"12x 3.5-inch HDD SAS backplane cabling" on
104.
"Installing a 3.5-inch HDD module" on page 264
379.
"Mounting the side cover" on page 114
125.
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
250.
"Installing the system
"Installing the system air duct"
"Mounting the top cover"
124.
122.
"Connecting the server to
687.
270.
"3.5-
(tower
329