Connecting Gpgpu Card Power Cables To The Power Backplane - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Expansion cards and backup units
Ê Open the side / top cover as described in section
on page 75 (rack server) or
server).
Ê Remove the air duct as described in section
on page 92.
9.4.1.3

Connecting GPGPU card power cables to the power backplane

Figure 279: GPGPU power cable (T26139-Y3946-V701)
Ê Remove the system board as described in section
board" on page
Ê Remove the system board carrier as described in section
system board carrier" on page
444
"Removing the side cover" on page 84
798.
98.
Upgrade and Maintenance Manual
"Removing the top cover"
"Removing the system air duct"
"Removing the system
"Removing the
TX300 S7 / RX350 S7
(tower