Installing The Rear Fan Holder - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual
Hide thumbs
Also See for PRIMERGY TX300 S7:
- Upgrade and maintenance manual (962 pages) ,
- Operating manual (90 pages) ,
- System configurator and order-information manual (36 pages)
Table of Contents
Advertisement
Fans
8.3.4.4
Installing the rear fan holder
Figure 249: Mounting the rear fan holder (A)
Ê Lower the rear fan holder into the chassis.
Ê Fit the four hooks on the rear fan holder into the keyhole slots in the chassis.
Ê Press down on the rear fan holder until the four hooks lock in the narrow
ends of the keyhole slots (see close-up).
Upgrade and Maintenance Manual
393
TX300 S7 / RX350 S7
Advertisement
Table of Contents
