8X 2.5-Inch Hdd Sas Backplane Cabling - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

7.2.2.2

8x 2.5-inch HDD SAS backplane cabling

I
Before connecting SAS cables to the controller, bend the cables as
needed in order to reduce strain on the controller. Bend the SAS cables
as close to their shrink tubes as possible.
SAS cabling
Cable
(T26139-)
SAS cable
Y3963-V101
SAS cable
Y3963-V101
Power cabling
Cable
(T26139-)
HDD power cable
Y3952-V601
TX300 S7 / RX350 S7
Cabling
from
list no.
Connector MLC 1 on
16
SAS controller 1
Connector MLC 2 on
16
SAS controller 1
Cabling
from
list no.
Power backplane
1
connector X21
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
to
SAS backplane 1
connector X1
SAS backplane 2
connector X1
to
SAS backplane 1
connector X6
(HDDs 1, 3, 5, 7)
Cable connector P2
SAS backplane 2
connector X6
(HDDs 2, 4, 6, 8)
Cable connector P1
Cabling
plan
16.2.11
Cabling
plan
16.2.9
193