Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual page 847

Ê Place the enclosed load warning sign on the left front edge of the top cover
as shown.
Ê Mount the support bracket and rack mounting rails in the rack as described
in the "Rack Mounting Kit - RMK-F2 Drop-In" Mounting Instructions.
I
The document is available online at
(http://jp.fujitsu.com/platform/server/primergy/manual/
market) or from the ServerView Suite DVD 2 supplied with your
PRIMERGY server. The printed poster is contained in the rack
mounting kit.
Ê Mount the server in the rack as described in section
the rack" on page
Ê Reconnect all external cables.
Ê Reconnect the AC power cords to the power supply units and secure them
with PSU cable brackets as described in section
the mains" on page
Ê Update your server's chassis information on the Chassis ID EPROM
integrated into the front panel board. For further information on how to obtain
and use the ChassisId_Prom Tool, refer to section
Prom Tool" on page
Ê Change the chassis model setting to "rack server" as described in section
"Specifying the chassis model" on page
TX300 S7 / RX350 S7
Converting a tower server to a rack server
122.
125.
159.
Upgrade and Maintenance Manual
http://manuals.ts.fujitsu.com
"Mounting the server in
"Connecting the server to
"Using the Chassis ID
161".
for the Japanese
847