Removing The Accessible Drive Cage - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

15.4

Removing the accessible drive cage

Figure 551: Detaching the accessible drive cage (A)
Ê Remove two screws from the bottom side of the server as shown.
Ê Bring the server back to its horizontal position.
I
At least two people are needed to turn over a fully equipped server.
Remove hard disk drives and power supply modules in order to
facilitate the task.
TX300 S7 / RX350 S7
Converting a tower server to a rack server
Upgrade and Maintenance Manual 829