Reinstalling Accessible Drives - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

15.9

Reinstalling accessible drives

Figure 565: Reinstalling accessible drives
Ê Reinstall the front panel (rotated by 90 degrees) as described in section
"Installing the front panel module" on page
Ê Reinstall all accessible drives into their original bays (rotated by 90 degrees)
according to the mounting sequence in
described in section
Ê Reinstall all accessible drive filler covers and front covers as described in
section "Installing accessible drive dummy covers" on page
TX300 S7 / RX350 S7
Converting a tower server to a rack server
"Cabling the accessible drive" on page
Upgrade and Maintenance Manual
710.
table 5 on page 599. Proceed as
609.
622.
843