Kyocera 300ci Service Manual page 99

Maintenance
item No.
U091 3. Press the start key. The value is set.
4. After changing the Threshold(Com) value, turn the main power switch off and on.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Adjusting the exposure density gradient
U093
Description
Changes the exposure density gradient in the manual density mode, depending on respective image quality
modes.
Purpose
To set how the image density is altered by a change of one step in the manual density adjustment for respec-
tive image quality modes. Also used to make copy images darker or lighter.
Start
1. Press the start key.
2. Select the image quality mode. The setting screen for the selected item is displayed.
Display
TEXT
MIXED
OTHER
FAX TEXT
FAX PHOTO
Setting: [TEXT]
1. Select the item to be set.
2. Change the setting value using the +/- or numeric keys.
Display
TEXT F/C
DARKER
TEXT F/C
LIGHTER
TEXT MONO
DARKER
TEXT MONO
LIGHTER
Increasing the setting makes the change in density larger, and decreasing it makes the change smaller.
3. Press the start key. The value is set.
Setting: [MIXED]
1. Select the item to be set.
2. Change the setting value using the +/- or numeric keys.
Display
MIXED F/C
DARKER
MIXED F/C
LIGHTER
MIXED MONO
DARKER
MIXED MONO
LIGHTER
Increasing the setting makes the change in density larger, and decreasing it makes the change smaller.
3. Press the start key. The value is set.
Description
Description
Density in the text mode
Density in the text and photo mode
Density in modes other than the text mode or the text and photo mode
Density in the text in fax mode
Density in the photo in fax mode
Description
Change in density when manual density is
set dark (full color mode)
Change in density when manual density is
set light (full color mode)
Change in density when manual density is
set dark (single color mode)
Change in density when manual density is
set light (single color mode)
Description
Change in density when manual density is
set dark (full color mode)
Change in density when manual density is
set light (full color mode)
Change in density when manual density is
set dark (single color mode)
Change in density when manual density is
set light (single color mode)
2JZ/2JX/2JV/2H7-5
Setting range Initial setting
0 to 3 0
0 to 3 0
0 to 3 0
0 to 3 0
Setting range Initial setting
0 to 3 0
0 to 3 0
0 to 3 0
0 to 3 0
1-3-53