Kyocera 300ci Service Manual page 158

2JZ/2JX/2JV/2H7-5
Maintenance
item No.
Specific paper feed location setting for printing function
U341
Description
Sets a paper feed location specified for printer output (only if a printer kit is installed).
Purpose
To use a paper feed location only for printer output.
A paper feed location specified for printer output cannot be used for copy output.
Method
1. Press the start key.
2. Select the paper feed location for the printer.
Two or more cassette can be selected.
Display
CASSETTE 1
CASSETTE 2
CASSETTE 3
CASSETTE 4
LCF
When an optional paper feed device is not installed, the corresponding count is not displayed.
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Switching between duplex/simplex copy mode
U343
Description
Switches the initial setting between duplex and simplex copy.
Purpose
To be set according to frequency of use: set to the more frequently used mode.
Setting
1. Press the start key.
2. Select ON or OFF.
Display
ON
OFF
Initial setting: OFF
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-112
Description
Description
Cassette 1
Cassette 2
Cassette 3 (optional paper feeder)
Cassette 4 (optional paper feeder)
Optional 3000-sheet paper feeder
Description
Duplex copy
Simplex copy