Kyocera 300ci Service Manual page 120

2JZ/2JX/2JV/2H7-5
Maintenance
item No.
Displaying developing bias
U140
Description
Displays various developing bias value.
Purpose
To check the developing bias value.
Method
1. Press the start key.
2. Select the item to be set or displayed.
Display
Dev Roll2 DC
Dev Roll1(Calib)DC
Dev Roll2 AC
Dev Roll1DC
Roll1 DC Int
Dev Roll1AC
DEV Roll Freq
DEV Roll Duty
Dev Roll2 Duty
Setting: [Dev Roll2 DC]
1. Select the item to be set.
2. Change the value using the +/- or numeric keys.
Display
Dev Roll2 DC (C)
Dev Roll2 DC (M)
Dev Roll2 DC (Y)
Dev Roll2 DC (K)
Dev Roll2 DC (BW) Developing sleeve roller DC bias in black/white
*1: 40/40, 50/40 ppm model *2: 25/25, 30/30 ppm model
3. Press the start key. The value is set.
1-3-74
Description
Description
Developing sleeve roller DC bias
Developing magnet roller DC bias (toner thick layer calibration)
Developing sleeve roller AC bias
Developing magnet roller DC bias
Developing magnet roller paper interval DC bias
Developing magnet roller AC bias
Developing magnet roller frequency
Developing magnet roller duty
Developing sleeve roller duty
Description
Developing sleeve roller DC bias for cyan
Developing sleeve roller DC bias for magenta
Developing sleeve roller DC bias for yellow
Developing sleeve roller DC bias for black
mode (50/40 ppm model only)
Setting Initial
range setting
0 to 255 93 /80
*1 *2
0 to 255 93 /80
*1 *2
0 to 255 93 /80
*1 *2
0 to 255 93 /80
*1 *2
0 to 255 101
*1