Kyocera 300ci Service Manual page 172

2JZ/2JX/2JV/2H7-5
Maintenance
item No.
Setting the offset for the color balance
U429
Description
Displays and changes the density for each color during copying in the various image quality modes.
Purpose
To change the balance for each color.
Method
1. Press the start key.
2. Select the image quality mode. The setting screen for the selected item is displayed.
Display
Text + Photo
Photo
Printed photo
Text
Map
Printed Document
Setting
1. Select the item to be set.
2. Change the setting value using the +/- or numeric keys.
Display
CYAN
MAGENTA
YELLOW
BLACK
Increasing the value darkens the density and decreasing it lightens the density.
3. Press the start key. The value is set.
Supplement
While this maintenance item is being executed, copying from an original is available in interrupt copying mode
(which is activated by pressing the system menu key).
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-126
Description
Description
Density of each color in the text & photo mode
Density of each color in the photo mode
Density of each color in the printed photo mode
Density of each color in the text mode
Density of each color in the map mode
Density of each color in the ptinted document mode
Description
Value of the cyan setting
Value of the magenta setting
Value of the yellow setting
Value of the black setting
Setting range Initial setting
-5 to 5 0
-5 to 5 0
-5 to 5 0
-5 to 5 0