Kyocera 300ci Service Manual page 97

Maintenance
item No.
Outputting the MIP-PG pattern
U089
Description
Selects and outputs the MIP-PG pattern created by the machine.
Purpose
To check machine status other than scanner when adjusting image printing, using MIP-PG pattern output
(without scanning).
Method
1. Press the start key.
2. Select the MIP-PG pattern to be output and press the start key.
Display
256GRADATION
COLOR BELT
GRAY(C)
GRAY(M)
GRAY(Y)
GRAY(K)
WHITE
GRADATION GRAY
3. Press the system menu key.
4. Press the start key. A MIP-PG pattern is output.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Description
256-gradation PG
Four color belts PG
Cyan PG
Magenta PG
Yellow PG
Black PG
Blank paper PG
5-graduation gray PG
Purpose
To check the gradation reproducibility
To check the developing state and the
engine section ID
To check the drum quality
To check the drum quality
To check the drum quality
To check the drum quality
To check the drum quality
To check for vertical lines on the laser
scanner unit
2JZ/2JX/2JV/2H7-5
1-3-51