Kyocera 300ci Service Manual page 223

Section Jam code
Paper 26
feed sec- Multiple sheets in
tion MP tray paper feed
section
Paper 30
convey- Misfeed in registra-
ing sec- tion/transfer sec-
tion tion
31
Misfeed round the
transfer belt
Fuser 40
section Misfeed in fuser
section (MP tray)
41
Misfeed in fuser
section (cassette
1)
42
Misfeed in fuser
section (cassette
2)
43
Misfeed in fuser
section (cassette
3)
44
Misfeed in fuser
section (cassette
4)
45
Misfeed in fuser
section (3000-
sheet paper
feeder)
46
Misfeed in fuser
section (duplex
section)
Conditions
The MP paper conveying switch (MPPCSW) does
not turn on within specified time of MP paper feed
switch (MPPFSW) turning on.
The MP paper conveying switch (MPPCSW) does
not turn off within specified time of MP paper feed
switch (MPPFSW) turning off.
The registration switch (RSW) does not turn on
within specified time of MP paper conveying switch
(MPPCSW) turning on.
The registration switch (RSW) does not turn off
within specified time of MP paper feed switch
(MPPFSW) turning off.
The registration switch (RSW) does not turn off
within specified time of feed switch 1 (FSW1) turning
off.
The loop sensor (LS) does not turn on within speci-
fied time of the registration clutch (RCL) turning on.
The eject switch (ESW) does not turn on within
specified time of the loop sensor (LS) (40/40, 50/40
ppm)/JAM detection sensor (JDS) (25/25, 30/30
ppm) turning on.
The eject switch (ESW) does not turn on within
specified time of the loop sensor (LS) (40/40, 50/40
ppm)/JAM detection sensor (JDS) (25/25, 30/30
ppm) turning on.
The eject switch (ESW) does not turn on within
specified time of the loop sensor (LS) (40/40, 50/40
ppm)/JAM detection sensor (JDS) (25/25, 30/30
ppm) turning on.
The eject switch (ESW) does not turn on within
specified time of the loop sensor (LS) (40/40, 50/40
ppm)/JAM detection sensor (JDS) (25/25, 30/30
ppm) turning on.
The eject switch (ESW) does not turn on within
specified time of the loop sensor (LS) (40/40, 50/40
ppm)/JAM detection sensor (JDS) (25/25, 30/30
ppm) turning on.
The eject switch (ESW) does not turn on within
specified time of the loop sensor (LS) (40/40, 50/40
ppm)/JAM detection sensor (JDS) (25/25, 30/30
ppm) turning on.
The eject switch (ESW) does not turn on within
specified time of the loop sensor (LS) (40/40, 50/40
ppm)/JAM detection sensor (JDS) (25/25, 30/30
ppm) turning on.
2JZ/2JX/2JV/2H7
Specified time
40/40 ppm
25/25 ppm 50/40 ppm
50/40 ppm
30/30 ppm
Color
3507 ms 2505 ms 2104 ms
4173 ms 2981 ms 2504 ms
2787 ms 1990 ms 1672 ms
2120 ms 1514 ms 1272 ms
1413 ms 1010 ms 848 ms
973 ms 695 ms 584 ms
967 ms 690 ms 580 ms
967 ms 690 ms 580 ms
967 ms 690 ms 580 ms
967 ms 690 ms 580 ms
967 ms 690 ms 580 ms
967 ms 690 ms 580 ms
967 ms 690 ms 580 ms
B/W
1-4-5