Kyocera 300ci Service Manual page 191

Maintenance
item No.
Checking copy counts by paper feed locations
U901
Description
Displays or clears copy counts by paper feed locations.
Purpose
To check the time to replace consumable parts.
Method
1. Press the start key. The counts by paper feed locations are displayed.
Display
MP TRAY
CASETTE 1
CASETTE 2
CASETTE 3
CASETTE 4
DUPLEX
LCF
When an optional paper feed device is not installed, the corresponding count is not displayed.
Clearing
1. Select the counts to be cleared.
CASETTE 3, CASETTE 4 and LCF cannot be cleared.
2. Select the counts for all and press [ALL CLEAR].
3. Press the start key. The counts is cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Checking/clearing finisher punch count
U902
Description
Sets the punch limit and displays and clears the punch-hole scrap count when 3000-sheet document finisher
is installed.
Purpose
Sets the punch limit to notify the user of the time to collect punch-hole scrap. Also, used to manually clear the
punch-hole scrap count if a message requiring collection of punch-hole scrap is shown on the touch panel
after collection. If punch-hole scrap is collected with the machine power turned off, the punch-hole scrap count
is not cleared and consequently this problem occurs.
Setting
1. Press the start key.
2. Select the item.
3. Change the value using the numeric keys.
Display
PUNCH LIMIT (*1000)
PUNCH WASTE
COUNT
The punch limit can be set in increments of 1000.
4. Press the start key. The value is set.
Clearing
1. Enter 0 using the numeric keys.
2. Press the start key. The count is cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Description
MP tray
Cassette 1
Cassette 2
Cassette 3 (optional paper feeder)
Cassette 4 (optional paper feeder)
Duplex unit
Optional 3000-sheet paper feeder
Description
Punch limit (maximum number of punching times)
Punch-hole scrap count (current number of punch-
ing times)
2JZ/2JX/2JV/2H7-5
Setting range
0 to 9999000
0 to 9999999
1-3-145