Kyocera 300ci Service Manual page 162

2JZ/2JX/2JV/2H7-5
Maintenance
item No.
Adjusting margins for scanning an original from the DP
U404
Description
Adjusts margins for scanning the original from the DP.
Purpose
Make the adjustment if margins are incorrect.
Caution
Before making this adjustment, ensure that the following adjustments have been made in maintenance mode
U402
(P.1-3-114)
Adjustment
1. Press the start key.
2. Select the item.
Display
A MARGIN
B MARGIN
C MARGIN
D MARGIN
A MARGIN
(BACK)*
B MARGIN
(BACK)*
C MARGIN
(BACK)*
D MARGIN
(BACK)*
*: Dual scan DP only.
3. Press the system menu key.
4. Place an original on the DP and press the start key to make a test copy.
5. Press the system menu key.
6. Change the setting value using the +/- keys.
Increasing the value makes the margin wider, and decreasing it makes the margin narrower.
7. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-116
U403
U404
(P.1-3-115)
Description
Left margin
Leading edge margin
Right margin
Trailing edge margin
Left margin (second side)
Leading edge margin (second side)
Right margin (second side)
Trailing edge margin (second side)
Leading edge margin
(3.0 ± 1.5 mm)
Left margin
(2.0 ± 1.0 mm)
Trailing edge margin
(2.0 ± 1.0 mm)
Description
Setting
range
0 to 10.0
0 to 10.0
0 to 10.0
0 to 10.0
0 to 10.0
0 to 10.0
0 to 10.0
0 to 10.0
Right margin
(2.0 ± 1.0 mm)
Figure 1-3-24
Initial Change in
setting value per step
3.0 0.5 mm
2.5 0.5 mm
3.0 0.5 mm
4.0 0.5 mm
3.0 0.5 mm
2.5 0.5 mm
3.0 0.5 mm
4.0 0.5 mm