Kyocera 300ci Service Manual page 305

6. Remove the inserted parts and then remove
the MP forwarding pulley from the pulley
unit.
7. Remove two stop rings and bushes.
8. Remove the MP paper feed pulley from the
MP paper feed shaft.
Removing the MP separation pulley
9. Turn the MP unit over and remove the
spring.
10. Remove the separation pulley holder from
the MP unit.
Pulley unit
Stop ring
Bush
Figure 1-5-14
Spring
MP unit
Figure 1-5-15
2JZ/2JX/2JV/2H7
MP forwarding pulley
MP paper feed shaft
Stop ring
Bush
MP paper feed pulley
Separation
pulley holder
1-5-9