Kyocera 300ci Service Manual page 214

2JZ/2JX/2JV/2H7-5
Deleting the Registered Information
1. Press [Delete].
2. Press [Yes] on the screen to confirm the deletion
of the data registered in the One Touch Key.
Destination Filter Settings
1. Press [Next] of Address Book Defaults and then
[Change] of Narrow Down.
2. Select the type of destination filter.
3. Press [OK].
(11) Internet Browser Setup
Internet Browser Setting
1. Press [Change] of Internet Browser.
2. Press [On] or [Off].
3. Press [OK].
Browser Preferences
1. Press [Next] of Browser Environment.
2. To set your home page, press [Change] of Home
Page, press [URL], enter the URL and then press
[OK]. Press [OK] again.
3. To set the text size, press [Change] of Text Size,
select [Large], [Medium] or [Small] as the text size
and then press [OK].
4. To set the display mode, press [Change] of Display
Mode, select [Normal], [Just-Fit Rendering] or
[Smart-Fit Rendering] as the display mode and then
press [OK].
5. To specify the settings for accepting cookies, press
[Change] of Cookie, select [Accept All], [Reject All]
or [Prompt before Accepting] as your cookie accep-
tance policy and then press [OK].
Proxy Settings
1. Press [Change] of Proxy and then press [On].
To set a proxy server (HTTP)
1. Press [Keyboard] of Proxy Server (HTTP), enter
the proxy address and press [OK].
2. Press [# Keys] and enter the port number.
To set a proxy server (HTTPS)
1. Press [Keyboard] of Proxy Server (HTTPS),
enter the proxy address and press [OK].
2. Press [# Keys] and enter the port number.
To set domains for which no proxy is used
1. Press [Keyboard] of Do Not Use Proxy for Fol-
lowing Domains, enter the domain name and
press [OK].
2. Press [OK].
1-3-168
(12) Applications
Starting/Exiting Application Use
1. Select the desired application and press [License
On].
You can view detailed information on the selected
application by pressing [Detail].
2. Enter the license key and press [Official]. Some
applications do not require you to enter an license
key. If the license key entry screen does not
appear, go to Step 3.
To use the application as a trial, press [Trial] without
entering the license key.
3. When the confirmation screen appears, press
[Yes].
Installing Applications
1. Insert the USB memory containing the application
to be installed into the USB memory slot (A1).
2. Press [Add].
3. Select the application to be installed and press
[Install].
You can view detailed information on the selected
application by pressing [Detail].
4. When the confirmation screen appears, press
[Yes].
Installation of the application begins. Depending on
the application being installed, the installation may
take some time. Once the installation ends, the
original screen reappears.
5. To install another application, repeat steps 3 to 4.
6. To remove the USB memory, press [Remove Mem-
ory] and wait until the Removable Memory can be
safely removed message appears. Then remove
the USB memory.
Deleting Applications
1. Select the application to be deleted and press
[Delete].
You can view detailed information on the selected
application by pressing [Detail].
2. When the deletion confirmation screen appears,
press [Yes]. The application is deleted.