Kyocera 300ci Service Manual page 71

Maintenance
item No.
Checking switches and sensors for paper conveying
U031
Description
Displays the on-off status of each paper detection switch or sensor on the paper path.
Purpose
To check if the switches and sensor for paper conveying operate correctly.
Method
1. Press the start key.
2. Turn each switch or sensor on and off manually to check the status.
When a switch or sensor is detected to be in the ON position, the display for that switch or sensor will be
highlighted.
Display
MPF Unit
MPF Feed1 JAM
MPF Feed2 JAM
Cassette1 JAM
Cassette2 JAM
Desk/Deck JAM
Regist Roller JAM
Fuser JAM
Exit JAM
DU Feed1 JAM
DU Feed2 JAM
Paper Full
JobSepa FIN Exit JAM
JobSepa Inner JAM1
JobSepa Inner JAM2
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Switches and sensors
MP tray switch (MPTSW)
MP paper feed switch (MPPFSW)
MP paper conveying switch (MPPCSW)
Feed switch 1 (FSW1)
Feed switch 2 (FSW2)
Feed switch 3 (FSW3)
Registration switch (RSW)
Loop sensor (LS)
Eject switch (ESW)
Feedshift switch (FSSW)
Duplex switch (DUSW)
Paper full sensor (PFS)
Finisher eject switch (FESW) (option)
Job eject switch (JESW) (option)
Job separator eject switch (JBESW) (option)
2JZ/2JX/2JV/2H7-5
1-3-25