Kyocera 300ci Service Manual page 132

2JZ/2JX/2JV/2H7-5
Maintenance
item No.
Operating the DP separately
U203
Description
Simulates the original conveying operation separately in the DP.
Purpose
To check the DP operation.
Method
1. Press the start key.
2. Place an original in the DP if running this simulation with paper.
3. Select the item to be operated.
Display
CCD ADP
(NON P)
CCD ADP
CCD RADP
(NON P)
CCD RADP
CIS RADP
(NON P)*
CIS RADP*
SPEED
*: Dual scan DP only.
4. Press the start key. The operation starts.
5. To stop continuous operation, press the stop key.
Completion
Press the stop key when the operation stops. The screen for selecting a maintenance item No. is displayed.
1-3-86
Description
Description
Without paper, single-sided original of CCD
(continuous operation)
With paper, single-sided original of CCD
Without paper, double-sided original of CCD
(continuous operation)
With paper, double-sided original of CCD
Without paper, double-sided original of CIS
(continuous operation)
With paper, double-sided original of CIS
Switching between normal reading (600 dpi)
and high-speed reading
Setting range Initial setting
- -
- -
- -
- -
- -
- -
0 (Normal)/
0
1 (High-speed)