Kyocera 300ci Service Manual page 133

Maintenance
item No.
Setting the presence or absence of a key card or key counter
U204
Description
Sets the presence or absence of the optional key card or key counter.
Purpose
To run this maintenance item if a key card or key counter is installed.
Method
1. Press the start key.
2. Select the item to be set. The setting screen for the selected item is displayed.
Display
Device Setting
Message Setting
Setting: [KEY-DEVICE]
1. Select the optional counter to be installed.
Display
Key-Card
Key-Counter
OFF
Initial setting: OFF
2. Press the start key. The setting is set.
3. Turn the main power switch off and on.
Setting: [MESSAGE]
1. Select the [Key Device] or [Coin Vender].
2. Press the start key. The setting is set.
3. Turn the main power switch off and on.
Setting the presence or absence of the coin vender
U206
Description
Sets the presence or absence of the optional coin vender. Also sets the details for coin vender operation, such
as mode and unit price.
This is an optional device which is currently supported only by Japanese specification machines, so no setting
is necessary.
Checking the operation panel keys
U207
Description
Checks operation of the operation panel keys.
Purpose
To check operation of all the keys and LEDs on the operation panel.
Method
1. Press the start key. The screen for executing is displayed.
2. COUNT0 is displayed and the leftmost LED on the operation panel lights.
3. As the keys lined up in the same line as the lit indicator are pressed in the order from the top to the bot-
tom, the figure shown on the touch panel increases in increments of 1. When all the keys in that line are
pressed and if there are any LEDs corresponding to the keys in the line on the immediate right, the top
LED in that line will light.
4. When all the keys on the operation panel have been pressed, all the LEDs light for up to 10 seconds.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Description
Sets the presence or absence of the key card or key counter
Sets the message when optional equipment is not installed
Description
The key card is installed
The key counter is installed
Not installed
2JZ/2JX/2JV/2H7-5
1-3-87