Kyocera 300ci Service Manual page 358

2JZ/2JX/2JV/2H7
(2) MP tray paper feed section
Pressing the start key activates the MP solenoid (MPSOL) to release the paper stopper, which in turn causes the MP for-
warding pulley mounted on the MP support to descend. In turn, the MP forwarding pulley comes in contact with the paper
placed on the MP tray is fed forward as the MP forward pulley rotates and forwarded to the MP paper feed pulley and the
MP separation pulley. Also during paper feed, the MP separation pulley prevents multiple sheets from being fed at one
time by the torque limiter.
9 5 2
8 4 3
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
2-1-4
6 1
15
7
Figure 2-1-4 MP tray paper feed section (1)
MP forwarding pulley
MP paper feed pulley
MP separate pulley
MP middle roller
MP middle pulley
MP paper switch (MPPSW)
Actuator (MP paper switch)
MP paper feed switch (MPPFSW)
Actuator (MP paper feed switch)
10
14
(10) MP table
(11) MP tray extension
(12) MP paper size length switch
(MPPLSW)
(13) Actuator
(MP paper size length switch)
(14) MP paper size width switch
(MPPWSW)
(15) Paper stopper
13 11
12