Kyocera 300ci Service Manual page 138

2JZ/2JX/2JV/2H7-5
Maintenance
item No.
Method: [FINISHER SOL]
U240
1. Select the item to be operated.
2. Press the start key. The operation starts.
Display
FEED IN SOL
REAR DOWN SOL 1
REAR DOWN SOL 2
SUB PATH SOL
SUB TRAY R SOL
SUB TRAY L SOL
BOOKLET SOL
PADDLE SOL
HOLD DOWN SOL
EJECT SOL
PUNCH SOL
Method: [MAIL BOX]
1. Select the item to be operated.
2. Press the start key. The operation starts.
Display
CARRY ROLL
BRANCH ROLL
Method: [BOOKLET]
1. Select the item to be operated.
2. Press the start key. The operation starts.
Display
CONV MOTOR
BLADE MOTOR
BUNDLE UP MOTOR
BUNDLE DOWN MOTOR
WIDTH TEST(A3)
WIDTH TEST(LD)
STAPLE MOTOR
Completion
Press the stop key with the operation stopped. The screen for selecting a maintenance item No. is displayed.
1-3-92
Description
Solenoid
Paper entry solenoid (PESOL)
Trailing edge holder solenoid 1 (TEHSOL1)
Trailing edge holder solenoid 2 (TEHSOL2)
Relief path solenoid (RPSOL)
Feedshift solenoid 1 (FSSOL1)
Feedshift solenoid 2 (FSSOL2)
Centerfold feedshift solenoid (CFSSOL)
Paddle solenoid (PDSOL)
Paper holder solenoid (PHSOL)
Pressure switching solenoid (PSWSOL)
Punch pattern solenoid (PPSOL)
Motor
Mailbox drive motor (MBDM) is turned on at paper conveying
Mailbox drive motor (MBDM) is turned on at feedshift operation
Motor
Centerfold main motor (CMM)
Blade motor (BLM)
Centerfold paper conveying belt motor 1 (CPCBM1)
Centerfold paper conveying belt motor 2 (CPCBM2)
Centerfold side registration motor 1/2 (CSRM1/2)
Centerfold side registration motor 1/2 (CSRM1/2)
Centerfold staple motor (CSTM)