Kyocera 300ci Service Manual page 135

Maintenance
item No.
Operation panel lock
U223
Description
Sets the operation panel lock function to ON or OFF.
Purpose
To restrict operation in the system menu on the operation panel.
Setting
1. Press the start key.
2. Select the item.
Display
Unlock
Partial Lock
Lock
Initial setting: Unlock
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Panel sheet extension
U224
Description
Changes the image data and the message of the opening screen at the machine startup and the image data
and the message of the service call screen to user specified data.
Purpose
Set according to the preference of the user.
Setting
1. Write the image data or the message data to the USB memory.
2. Insert USB memory in USB memory slot of the machine.
3. Turn the main power switch on.
4. Enter the maintenance item.
5. Press the start key.
6. Select the [Install] or [UnInstall].
Display
Install
UnInstall
7. Select the item.
Display
Opening Img
Call Img
Call Msg Top
Call Msg Detail
8. Press the start key. Installation or uninstallation is started.
9. When normally completed, [COMPLETE] is displayed.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Description
Release the lock of the operation from the system menu
Partially lock the operation from the system menu
Entirely lock the operation from the system menu
Description
Installs the image data or the message data
Restores the original image data or message data
Description
Startup screen
Service call image
Service call screen 1
Service call screen 2
2JZ/2JX/2JV/2H7-5
1-3-89