Kyocera 300ci Service Manual page 77

Maintenance
item No.
Adjusting the deflection in the paper
U051
Description
Adjusts the deflection in the paper at the registration roller.
Purpose
Make the adjustment if the leading edge of the copy image is missing or varies randomly, or if the copy paper
is Z-folded.
Method
1. Press the start key.
2. Select the item to be adjusted.
Display
Paper Loop Amount
Paper Loop Amount B/W*
*: 50/40 ppm model only.
Adjustment
1. Select the item.
When [Paper Loop Amount] is selected
Display
MPT (Large)
MPT Half (L)
Cassette (L)
Cassette Half (L) Paper feed from cassette
Duplex (L)
Duplex Half (L)
MPT (Small)
MPT Half (S)
Cassette (S)
Cassette Half (S) Paper feed from cassette
Duplex (S)
Duplex Half (S)
Large size: 218 mm or more in width of paper.
*1: 40/40, 50/40 ppm model *2: 25/25, 30/30 ppm model
Description
Description
Deflection adjustment
Deflection adjustment in black and white mode
Description
Paper feed from MP tray
(when large size paper is used)
Paper feed from MP tray
(when large size thick paper is used)
Paper feed from cassette
(when large size paper is used)
(when large size thick paper is used)
Duplex mode (second)
(when large size paper is used)
Duplex mode (second)
(when large size thick paper is used)
Paper feed from MP tray
(when small size paper is used)
Paper feed from MP tray
(when small size thick paper is used)
Paper feed from cassette
(when small size paper is used)
(when small size thick paper is used)
Duplex mode (second)
(when small size paper is used)
Duplex mode (second)
(when small size thick paper is used)
Setting Initial Change in
range setting value per step
-30 to 20 0 1 mm
-30 to 20 7 /1 1 mm
*1 *2
-30 to 20 1 1 mm
-30 to 20 7 /1 1 mm
*1 *2
-30 to 20 -2 /01 1 mm
*1 *2
-30 to 20 7 /6 1 mm
*1 *2
-30 to 20 0 1 mm
-30 to 20 -2 /-9 1 mm
*1 *2
-30 to 20 0 1 mm
-30 to 20 -2 /-9 1 mm
*1 *2
-30 to 20 0 1 mm
-30 to 20 -2 /-4 1 mm
*1 *2
2JZ/2JX/2JV/2H7-5
1-3-31