Kyocera 300ci Service Manual page 83

Maintenance
item No.
Setting: [Set FAN Mode]
U059
1. Select the mode.
Display
MODE1
MODE2
MODE3
Initial setting: MODE2
2. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Checking the operation of the exposure lamp
U061
Description
Lights the exposure lamp.
Purpose
To check whether the exposure lamp are turned ON.
Method
1. Press the start key.
2. Select the item.
Display
CCD
CIS
3. Press the start key. The lamp lights.
4. To turn the lamp off, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Description
Temperature at which paper conveying fan motors operate: High
Temperature at which paper conveying fan motors operate: Normal
Temperature at which paper conveying fan motors operate: Low
Description
The exposure lamp lights
The CIS lights (when dual scan DP is installed)
2JZ/2JX/2JV/2H7-5
1-3-37