Kyocera 300ci Service Manual page 70

2JZ/2JX/2JV/2H7-5
Maintenance
item No.
Checking the operation of the motors
U030
Description
Drives each motor.
Purpose
To check the operation of each motor.
Method
1. Press the start key.
2. Select the motor to be operated.
3. Press the start key. The operation starts.
Display
Feed Motor
DLP(Bk) Motor
DLP (Color) Motor
Fuser Motor
Exit Motor(CW)
Exit Motor(CCW)
Color Release Motor
Guide Motor
DU Motor
Job Separator Motor
Regist Motor*
*: 40/40, 50/40 ppm model only.
4. To stop operation, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-24
Description
Operation
Paper conveying motor (PCM) is turned ON
Developing motor K (DEVM-K) is turned ON
Developing motor MCY (DEVM-MCY) is turned ON
Fuser motor (FUM) is turned ON
Eject motor (EM) is turned on clockrwise
Eject motor (EM) is turned on counterclockwise
Color release motor (CRM) is turned ON
Rotary guide motor (RGM) is turned ON
Duplex motor (DUM) is turned ON
Job eject motor (JEM) is turned ON (option)
Registration motor (RM) is turned ON