Kyocera 300ci Service Manual page 72

2JZ/2JX/2JV/2H7-5
Maintenance
item No.
Checking the operation of the clutches
U032
Description
Turns each clutch on.
Purpose
To check the operation of each clutch.
Method
1. Press the start key.
2. Select the clutch to be operated.
3. Press the start key. The clutch turns on for 1 s.
Display
Feed1 Clutch
Feed2 Clutch
MPF Feeder On/Off Clutch
MID Roller Clutch
Vertical CONV. Clutch1
MPF Feed Clutch
Regist Clutch
Vertical CONV. Clutch2
Fuser Release Clutch
MOTOR ON
To stop motor driving, press [MOTOR ON] again.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Checking the operation of the solenoids
U033
Description
Applies current to each solenoid in order to check its ON status.
Purpose
To check the operation of each solenoid.
Method
1. Press the start key.
2. Select the solenoid to be operated.
3. Press the start key. The solenoid turns on for 1 s.
Display
Eject Branch Solenoid
MPT Pick up Solenoid
MOTOR ON
To stop motor driving, press [MOTOR ON] again.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-26
Description
Clutches
Paper feed clutch 1 (PFCL1)
Paper feed clutch 2(PFCL2)
MP paper feed clutch (MPPFCL)
Middle clutch (MCL) (25/25, 30/30 ppm model only)
Feed clutch 1 (FCL1) (40/40, 50/40 ppm model only)
MP paper conveying clutch (MPPCCL)
Registration clutch (RCL) (25/25, 30/30 ppm model only)
Feed clutch 2 (FCL2) (40/40, 50/40 ppm model only)
Fuser clutch (FUCL)
The paper conveying motor (PCM) is turned ON.
Solenoids
Job feedshift solenoid (JFSSOL)
MP solenoid (MPSOL)
The paper conveying motor (PCM) is turned ON.