Kyocera 300ci Service Manual page 189

Maintenance
item No.
Setting color/black and white operation mode
U486
Description
When color and B/W documents are mixed, sets operation mode after a color document is detected.
Purpose
To ensure productivity when copying color and B/W documents in ACS mode, select MODE3.
However, selecting MODE3 will increase the maintenance count for cyan, magenta, and yellow color develop-
ing units even when there is a B/W original after a color original.
Setting
1. Press the start key.
2. Select the MODE.
Display
MODE1
MODE2
MODE3
AUTO
Initial setting: MODE2
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Line speed: Color and B/W line speed is switched according to each original
Controlling developing motor MCY: Color and B/W mode is switched according to
each original
Line speed: Fixed at color line speed
Controlling developing motor MCY: Color and B/W mode is switched according to
each original
Line speed: Fixed at color line speed on and after a color original
Controlling developing motor MCY: Fixed at color mode on and after a color original
Automatic selection of MODE1 to 3 depending on the using pattern
Description
2JZ/2JX/2JV/2H7-5
1-3-143