Kyocera 300ci Service Manual page 84

2JZ/2JX/2JV/2H7-5
Maintenance
item No.
Adjusting the shading position
U063
Description
Changes the shading position of the scanner.
Purpose
Used when the white line continue to appear longitudinally on the image after the shading plate is cleaned.
This is due to flaws or stains inside the shading plate. To prevent this problem, the shading position should be
changed so that shading is possible without being affected by the flaws or stains.
Method
1. Press the start key.
2. Change the setting using the +/- or numeric keys.
40/40, 50/40 ppm models
Display
ADJUST DATA
25/25, 30/30 ppm models
Display
ADJUST DATA
Increasing the value moves the shading position toward the machine left, and decreasing it moves the
position toward the machine right.
3. Press the start key. The value is set.
Supplement
While this maintenance item is being executed, copying from an original is available in interrupt copying mode
(which is activated by pressing the system menu key).
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-38
Description
Description
Shading position
Description
Shading position
Setting Initial Change in
range setting value per step
0 to 18 0 0.113 mm
Setting Initial Change in
range setting value per step
0 to 24 0 0.085 mm