Kyocera 300ci Service Manual page 320

2JZ/2JX/2JV/2H7-1
11. Remove two connectors (YC17 and YC21).
12. Remove the screw and then remove the
clamp.
13. Remove the connector (YC12).
14. Release wire saddle 1 and 2, and then
remove the wires.
15. While pressing and holding the lock levers,
remove the three connectors (YC3, YC4
and YC11).
16. Release wire saddles 3 to 6, and then
remove the wires.
1-5-24
Wire
Wire saddle 1
Connector
(YC12)
Clamp
Screw
Wire saddle 2
Connector
(YC21)
Connector
(YC17)
Lock lever
Connector
(YC11)
Lock lever
Connector
(YC11)
Wire
Lock lever
Connector
(YC3,YC4)
Lock lever
Wire
Wire
Wire
saddle 3
Wire
saddle 4 Wire
saddle 5
Connector
(YC3)
Figure 1-5-40
Wire
saddle 6
Connector
(YC4)