Kyocera 300ci Service Manual page 43

31. Pass the connector of the key counter wire
through the aperture in the upper right
cover.
32. Refit the upper right cover.
33. Pass the key counter wire through the aper-
ture in the key counter cover retainer.
34. Insert the projection of the key counter cover
retainer in the slit of the upper right cover.
35. Fit the key counter cover retainer using the
M4 x 20 screw.
Connector
Upper right cover
Key counter wire
(302H746930)
Figure 1-2-29
Projection
Aperture
Key counter
cover retainer
(302GR03010)
Figure 1-2-30
2JZ/2JX/2JV/2H7-1
Aperture
Slit
Upper right cover
Key counter wire
(302H746930)
M4 x 20 screw
(7BB100420H)
1-2-21