Kyocera 300ci Service Manual page 65

Maintenance
item No.
U000
No.
(48) Billing counting timing
(49) Temperature (machine inside)
(50) Temperature (machine outside)
(51) Relative temperature (machine out-
side)
(52) Absolute temperature (machineout-
side)
(53) Fixed assets number
(54) Job end judgment time-out time
(55) Job end detection mode
(56) Media type attributes
1 to 28 (Not used: 18, 19, 20)
(57) Calibration information
(58) Calibration information
(59) Calibration information
(60) Calibration information
(61) Calibration information
(62) Calibration information
(63) Calibration information
(64) Calibration information
(65) Calibration information
(66) Calibration information
(67) RFID information
(68) RFID reader/writer version information
(69) Color table version
(70) Color table 2 version
(71) Maintenance information
(72) Drum serial number
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Description
Supplement
Weight settings
0: Light/1: Normal 1 / 2: Normal 2 / 3: Normal 3/
4: Heavy 1 / 5: Heavy 2 / 6: Heavy 3 / 7: Extra Heavy
Fuser settings
0: High / 1: Middle / 2: Low / 3: Vellum
Duplex settings
0: Disable / 1: Enable
Black/Cyan/Magenta/Yellow
2JZ/2JX/2JV/2H7-5
1-3-19