Kyocera 300ci Service Manual page 110

2JZ/2JX/2JV/2H7-5
Maintenance
item No.
Setting: [Belt Clean A(BW)]
U107
1. Change the value using the +/- or numeric keys.
Display
Width<160
160<=Width<220
220<=Width
2. Press the start key. The value is set.
Supplement
While this maintenance item is being executed, copying from an original is available in interrupt copying mode
(which is activated by pressing the system menu key).
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-64
Description
Description
Small sizes (under 160 mm wide)
Medium sizes (160 to under 220 mm
wide)
Large sizes (more than 220 mm wide)
Setting range Initial setting
0 to 255 120
0 to 255 120
0 to 255 120