Kyocera 300ci Service Manual page 140

2JZ/2JX/2JV/2H7-5
Maintenance
item No.
Method: [MAIL BOX]
U241
1. Turn each switch or sensor on and off manually to check the status.
When the on-status of a switch or sensor is detected, that switch or sensor is displayed in reverse.
Display
HP SW
EJECT SW
COVER SW
OVER FLOW SW 1
OVER FLOW SW 2
OVER FLOW SW 3
OVER FLOW SW 4
OVER FLOW SW 5
OVER FLOW SW 6
OVER FLOW SW 7
Method: [BOOKLET]
1. Turn each switch or sensor on and off manually to check the status.
When the on-status of a switch or sensor is detected, that switch or sensor is displayed in reverse.
Display
BUNDLE UP HP SW
BUNDLE DOWN HP SW
BLADE HP SW
WIDTH HP SW U
WIDTH HP SW L
FEED IN SW
PAPER DET SW
TRAY PAPER DET SW
EJECT SW
TRAY DET SW
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-94
Description
Switches and sensors
Mail paper entry switch (MPESW)
Tray eject sensor (TEJS)
Mailbox cover open/close switch (MCOSW)
Tray overflow switch 1 (TOFSW1)
Tray overflow switch 2 (TOFSW2)
Tray overflow switch 3 (TOFSW3)
Tray overflow switch 4 (TOFSW4)
Tray overflow switch 5 (TOFSW5)
Tray overflow switch 6 (TOFSW6)
Tray overflow switch 7 (TOFSW7)
Switches and sensors
Centerfold paper conveying belt sensor 1 (CPCBS1)
Centerfold paper conveying belt sensor 2 (CPCBS2)
Blade home position sensor (BLHPS)
Centerfold side registration sensor 2 (CSRS2)
Centerfold side registration sensor 1 (CSRS1)
Centerfold paper entry sensor (CPES)
Centerfold paper detection sensor (CPDS)
Tray paper detection sensor (TPDS)
Centerfold eject switch (CESW)
Centerfold top cover switch (CTCSW)