Kyocera 300ci Service Manual page 146

2JZ/2JX/2JV/2H7-5
Maintenance
item No.
Setting: [STAPLE POS ADJ]
U246
1. Select [STAPLE POS ADJ (A4R/LTR)], [STAPLE POS ADJ (B4R/LGR)] or [STAPLE POS ADJ (A3/LD)].
2. Change the setting value using the +/- or numeric keys.
Description
Adjustment of booklet stapling position for A4/Letter size
Adjustment of booklet stapling position for B4/Legal size
Adjustment of booklet stapling position for A3/Ledger size
When staples are placed too far right (sample 1), decrease the preset value. When staples are placed
too far left (sample 2), increase the preset value.
Reference value: within
3. Press the start key. The value is set.
Setting: [SADDLE POS ADJ]
1. Select [SADDLE POS ADJ (A4R/LTR)], [SADDLE POS ADJ (B4R/LGR)] or [SADDLE POS ADJ (A3/LD)].
2. Change the setting value using the +/- or numeric keys.
Description
Adjustment of center folding position for A4/Letter size
Adjustment of center folding position for B4/Legal size
Adjustment of center folding position for A3/Ledger size
When the centerfold position too far right (sample 1), increase the preset value. When the centerfold
position too far left (sample 2), decrease the setting value.
Reference value: within
3. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
1-3-100

2 mm

3 mm
Center line
Description
Setting
range
-10 to 10
-10 to 10
-10 to 10
2 mm
Sample 1
Figure 1-3-20
Setting
range
-10 to 10
-10 to 10
-10 to 10
3 mm
Sample 1
Figure 1-3-21
Initial Change in
setting value per step
0 0.55 mm
0 0.55 mm
0 0.55 mm
2 mm
Sample 2
Initial Change in
setting value per step
0 0.55 mm
0 0.55 mm
0 0.55 mm
3 mm
Sample 2