Chrysler 160 Workshop Manual page 283

Fig. 1
J2rY
CHANGING THE FRONT BRAKE SHOES
4246
1
Fig. 2 4247
Changing brake shoes is impe rative when t he total
thickness of the backing •
linin~
assembly is
reduced to 7 mm at its thinnest section.
For this
replacat~ent,
use the "lining reconditioning
k! t" 3.Vallabl e from the Spare Part Dep artment.
This kl t t;onhins:
• 4 brake shoes,
• 2 cross-shaped springs.
Operational procedure
- Unlock both front wheels.
- Set front of vehicle on pins, then remove wheels
after marking
th~
r pos!Hon.
For each side:
- Remove sheet metal splash shl eld from calliper.
- Extract both brake shoe retaining pins, using a
pi n-drl ft (Fig. 1), then ex tract cross-shaped
spring.
- Remove brake shoes (Fig. 2).
Reprint or tranalation, even partial, ia strictly prohibited without written permiuion from CHRYSLE-R. PRANCE
CHRYSLER
160- 1606T- 180