Advertisement
DISMANTLING THE STEERING COLUMN
2
Fig. 4
REMOVING THE STEER:WG WHEEL
- Remove steering wheel central cover (Fig. 4).
- Remove steering wheel central
f~stenlng
nut
(Fig. 5).
-Mark relative position of steering wheel and
steering shaft.
- Remove steering wheel.
REMOVING THE COMB:WED SWITCH
- Disconnect battery.
- Remove steering wheel.
Fig. 5
3957
3958
Fig. 6
- Loosen both screws used to
fasten steering
column tube
to dash panel,
and
lower the
steerin9 column (Fig. 6).
3959
- Remove 4 screws fastening the combined switch
shel Is.
- Remove shells.
- Remove combined switch 3
setscrews.
- Disconnect junction boxes used for electric
connections
with
main hamess,
- Clear combined switch harness
from
its
retaining
tab
on
steering column
tube.
- Remove combi
ned switch.
Fig. 7
3960
CHRYSLER
160- 160 GT- 180
Reprint or tronolotion, even partial, is strictly prohibited without written permission from CHRYSLER FRANCE
Advertisement
