Chrysler 160 Workshop Manual page 25

A011Z:
REMOVING AND RE- FITIING THE ENGINE
I ,
Fig. 7
II
7/
- Use long end of sling already used for 1100
engine (Fig. 7) to sling engine:
a) by 1eans of lifting tab fixed to cylinder
head;
b) by
running sling around exhaust manifold,
on flange sf de.
Run sling once around holst hook, as a
precautionary 1easure, and lift
engine~
whilst
guiding It, to re.ove It fro• engine ·
Fig. 9
0
0
N
1130
!/
;/
730
3
r
Y. 1034
compartment (Fig. 8).
Important: the engine must never be ude to rest on
the ground on its oil su•p In order not to da.age
the oil pu11p; the clearance between the botto11 of
the su•p and the oil pump strainer Is, Indeed, low;
the engine 1ust be 1ade to rest on a wooden supporting
rig 1ade in the workshop as shown on (Ftg.'9).
G.ooa
Reprint or translation, even partial, it strictly prohibited without written permission from CHRYSLER FRANCE
CHRYSLER
160- 160 GT- 180