Advertisement
RE-ASSEMBLING THE ENGINE
Fig. 39
3913
-
Re-f!
t:
- water drain plug on cylinder block, with its
sea 1,
- dipstick.
- Re-connect oil fuu recovery hoses (Figs. 39 and
~0),
one running from cylinder
head
cover to T
june ti on, the other from T junction to carburettor.
Fit oil fu•e filter on T junction, and· fit hose
connecting it with a! r f! lter in 1 et connect! on.
- Fasten fan on releasable hub on 341 engine, not
oaftting to fit 3 spacers (three 6 •• nuts).
- Re-fit engine lifting lug to cylinder head by
aeans of 2 THill 8 x 1.25-20 screws.
Fig.40
3914
Reprint or translation, even partial, is strictly prohibited without written permission from CHRYSLER FRANCE
AO;-vr
15
CHRYSLER
160- 160 GT- 180
Advertisement
