Chrysler 160 Workshop Manual page 219

OVERHAUL OF Dl FFERENTIAL
Fig . 9
4086
Drive rli fferential pinion shaft out (Fig. 10).
- Remove differential pinions, d!fferer.ti al si0e
I]'Oars, and side gear washers.
- Use extractor Ref. 15526 G with its bearing bu sh
to extract
2
bearings on
d!ffere~tial
case
(Fig. 11).
RE-ASS~LY
Re-asse!llbling the differenti 2l requires three
different adjustments of fundament::!] importance
to ensure a noi seless operation :~nd a lon!) life for
moving parts.
Fig. 10
4087
3
Fig . 11
4088
1. Adjustment of differential pinion position in
relation to crotn-wheel.
2. Adjustment of differen tial pinion taper bearing
pre-load.
3. A djustment of differential taper bearing pre-
load and bevel gear set tooth play.
Note: prior to undertaking any adjustment
operation, make sure that differential pinion
and crown-wheel are correctly matched (Fig. 12).
Fig. 12
4089
Reprint or translation, even partial, Is strictly prohibited without written permission from CHRYSLER FRANCE
CHRYSLER
160- 160 CiT· 180