Scale Zero Push Button - Datalogic Magellan 8400 Quick Reference Manual

PRESS
DURATION
Momentary Zero Scale
Momentary
(when the
scale's pri-
Scale power
mary indica-
cycle
tion shows an
under zero
condition)
Scale Diag-
nostics
4 Seconds
Mode
a. Diagnostics Mode is meant for use by trained systems support personnel. Users should not need to initi-
ate this function under normal circumstances.
8

Scale Zero Push Button

The Scale Zero Push Button is used for two functions as described
Table 3
in . This button has no function on "scanner-only" models.
Table 3. Scale Zero Push Button Functions
FUNCTION
When programmed to do so, the yellow Scale LED should be
lit when no weight is on the scale, indicating scale at zero. If
it is not, press the switch to zero the scale. The unit will
sound a "click" upon pressing the button.
When programmed to do so, and when certain conditions
are met, pressing this button will initiate a scale power cycle.
When the scale zero button is pushed and the weight on the
scale is close to zero, the scale will zero normally like the
zero scale function above. Otherwise, the scale will go
through a power cycle. If the scale is able to find zero after
the power cycle, the scale will perform normally. Otherwise,
the scale's primary indication will display a non-weight indi-
cation.
This mode allows system support personnel to troubleshoot
problems with the scale. Cycle power to exit Scale Diagnos-
a
tics Mode.
COMMENT
Magellan™ 8300/8400