Indicator And Keypad Button - Datalogic Matrix 120 Product Reference Manual

Indicator and Keypad Button

The following LED indicators are located on the reader:
PWR
NET
In normal operating mode the colors and meaning of the five LEDs are illustrated
in the following table:
READY
GOOD
TRIGGER
COM
STATUS
* When connected to a Fieldbus network through the CBX500, the COM LED is always
active, even in the absence of data transmission, because of polling activity on the
Fieldbus network.
During the reader startup (reset or restart phase), these five LEDs blink for one
second.
Product Reference Guide
    

 

Figure 15 - Indicators
blue LED indicates that the reader is connected to the
power supply (Figure 15
yellow LED indicates connection to the on-board
Ethernet network (Figure 15
green LED indicates that the reader is ready to
operate (Figure 15 -, 3)
green LED confirms successful reading
yellow LED indicates the status of the reading phase
(Figure 15 -, 5)
yellow LED indicates active communication on the
main serial port * (Figure 15
red LED indicates a NO READ result
Indicator and Keypad Button
-, 1)
-, 2)
(Figure 15
-, 6)
(Figure 15


-, 4)
-, 7)
33