Polycom RealPresence 1500 Administrator's Manual page 707

Collaboration server

Hide thumbs Also See for RealPresence 1500:

Table of Contents

RMX Time – Fields Properties

Retrieve Client Time

Use NTP Server

Adjust Reservations

After resetting the MCU a delay may occur when synchronizing with the external NTP server.

Polycom®, Inc.

The time zone difference between Greenwich and the MCU's physical location

in hours and minutes.

Select the Up or Down arrows to alter the GMT Offset time on the MCU. To

enter a negative offset either type a minus in the hour box or use the down

arrow and decrease the offset below zero.

Click this button to automatically update the MCU's GMT Date, Time and Offset

to match that of the workstation.

Select this check box to synchronize the time with up to three NTP servers.

When selected, the manual GMT Date and GMT Time setting options are

disabled. The GMT Offset fields are still active.

To implement this mode an external connection to an NTP server must be

Enter the IP addresses of the required NTP servers in order of precedence.

The Status field indicates whether registration with the NTP Server failed or

Note: TheCollaboration Server will not use a time source such as a

Windows-based, W32Time service (SNTP) time service. Only full-featured

(below Stratum 16) NTP Servers are considered sufficiently reliable for

high-accuracy timing environments.

Use this button to adjust the start time of all the reservations in one operation.

For more information see

Not supported in the RealPresence Collaboration Server.

Adjusting the Start Times of all

Administration and Utilities

Reservations.

Chapters

Table of Contents