The above procedures show how to modify the workstation's networking parameters using
the Windows New Connection Wizard.
For non-Windows operating systems an equivalent procedure must be performed by the
system administrator.
Before connecting directly, you must modify the IP Address, Subnet Mask and Default
Gateway settings of the workstation to be compatible with the Collaboration Server's
Alternate Management Network.
Step 3: Connect the RMX to the Workstation
» Connect the cable between the RMX port and the LAN port configured on the workstation.
Access to the Alternate Management Network is via a cable connected to a workstation. The Alternate Management Network is accessible only via the LAN 3 port on the RMX 2000, the Modem port on the RMX 1500 and LAN 1 port on the RMX
Need help?
Do you have a question about the RealPresence 1500 and is the answer not in the manual?
Questions and answers