Enabling Or Disabling The Automatic Muting Of Noisy Endpoints; Enabling Or Disabling Automatic Muting Of Noisy Endpoints In Conferences - Polycom RealPresence 1500 Administrator's Manual

Conditions for enabling/disabling the automatic muting of noisy endpoints
ENABLE_SELECTIVE_MIXING flag
Setting
YES
YES
YES
NO
NO
NO

Enabling or Disabling the Automatic Muting of Noisy Endpoints

The automatic muting of noisy endpoints can be enabled or disabled at the conference level (in the
Conference Profile) or at the system level, by changing the ENABLE_SELECTIVE_MIXING flag setting.
In new MCU installations, the automatic muting of noisy endpoints is automatically enabled on the MCU as
the ENABLE_SELECTIVE_MIXING flag is set to YES and the Auto mute noisy endpoints check box in the
Profile Properties - Audio Settings tab is selected.
You can disable the automatic muting of noisy endpoints by either setting the system flag to NO or clearing
the Auto mute noisy endpoints check box in the Profile Properties - Audio Settings tab.
If required, it is recommended to disabled the automatic muting of noisy endpoints at the conference level,
in the conference Profile without changing the flag settings.
In existing MCU sites, following the software upgrade the automatic muting of noisy endpoints is disabled
at the conference level in the existing conference Profile and has to be manually enabled in these profiles.
This option is automatically enabled when creating a new Profile.

Enabling or Disabling Automatic Muting of Noisy Endpoints in Conferences

If the ENABLE_SELECTIVE_MIXING flag is set to YES, the automatic muting of noisy endpoints can be
enabled or disabled at the conference level in the Conference Profile - Audio Settings dialog box.
If the ENABLE_SELECTIVE_MIXING flag is set to NO, the automatic muting of noisy endpoints is disabled
at the conference level and cannot be enabled in the Conference Profile - Audio Settings dialog box.
Polycom®, Inc.
Auto mute noisy endpoints
setting
Yes (check box selected)
No (check box cleared)
Unknown (for example, the
conference is started from the
DMA)
Yes (check box selected)
No (check box cleared)
Unknown (for example, the
conference is started from the
DMA)
Additional Conferencing Information
Automatic muting of noisy
endpoints State
Enabled
Disabled
Enabled
Disabled
Disabled
Disabled
229