Polycom RealPresence 1500 Administrator's Manual page 832

Ultra Secure Mode
WARNING: Once Ultra Secure Mode is enabled it can only be disabled by performing a Restore to
Factory Defaults. In addition, to implement a Maximum Security Environment, other Polycom
products on the network must be similarly configured.
For more information see
Server (RMX) 1500/2000/4000 Deployment Guide for Maximum Security Environments.
From Version 8.1/8.1.4.J, only MPMx cards are supported.
Ultra Secure Mode is the operating mode of the RealPresence Collaboration Server when deployed in a
Maximum Security Environment. When the MCU is set to Ultra Secure Mode, all enhanced security features
are activated and rigorously enforced.
When working in Ultra Secure Mode, the RMX Manager is the recommended option for accessing the
RMX's management console.
To download and install the RMX Manager onto a workstation
» The RMX Manager specific to the installed version must be downloaded from the Support section of
the Polycom website at
To install the RMX Manager:
1 Obtain the RMX Manager specific to Version 8.1.4.J from the Polycom Software Distribution
website.
2 Install the RMX Manager on the workstation:
a Using Windows, navigate to the folder where the downloaded RMX Manager has been saved.
b Double-click on the downloaded install file and follow the on-screen instructions to complete
the installation.
3 When the install of the RMX Manager is completed, launch the RMX Manager using the Windows
Start menu.)
Polycom®, Inc.
Restoring the RMX Using the USB Port
http://www.polycom.com/forms/rmx-sw-fed-thankyou.html
in the RealPresence Collaboration
802