Polycom RealPresence 1500 Administrator's Manual page 784

MCMS_PARAMETERS_USER Flags
Flag
ENABLE_ACCEPTING_ICMP_
REDIRECT
ENABLE_AGC
ENABLE_AUTO_EXTENSION
ENABLE_CASCADED_LINK_TO_
JOIN_WITHOUT_PASSWORD
ENABLE_CYCLIC_FILE_SYSTEM_
ALARMS
Polycom®, Inc.
Description
When set to YES, allows the RMX to accept ICMP Redirect Messages
(ICMP message type #5). For more information see
Message Protocol (ICMP).
Possible values: YES / NO
Default:
• Ultra Secure Mode: NO
• Standard Security Mode: YES
Set this flag to YES to enable the AGC option. (Default setting is NO.)
When disabled, selecting the AGC option in the Participant Properties has
not effect on the participant audio. For more information see
Address Book.
The Auto Gain Control mechanism regulates noise and audio volume by
keeping the received audio signals of all participants balanced.
Note:
Enabling AGC may result in amplification of background noise.
When set to YES, allows conferences running on the Collaboration Server
to be automatically extended as long as there are participants connected
and the system has free resources.
Set this flag to NO prevent conference duration from being automatically
extended. It can also be used to enable the definition of conference
duration that is shorter than is 11 minutes for the RealPresence
Collaboration Server (RMX) 1500 and 20 minutes for the RealPresence
Collaboration Server (RMX) 2000/4000.
Default: YES
Note: If this flag is set to:
• YES, Gateway Calls are not limited in duration while endpoints are
connected.
• NO, Gateway Calls are limited to 60 minutes.
For more information see
Enables a cascaded link to enter a conference without a password.
Default: NO, for security reasons.
Enables or disables the display of Active Alarms before overwriting the
older CDR/Auditor/Log files, enabling the users to backup the older files
before they are deleted.
Default: NO
Default (ULTRA_SECURE_MODE=YES): YES
System Configuration Flags
Gateway Functionality.
Internet Control
Managing the
754